The new multi-storey Lamborghini building, designed in collaboration with the engineering and architecture studio Prospazio from
Modena, was built to obtain Class A energy certification and is the first in Italy, in the industrial field, created entirely with these
Design, safety and energy saving are the elements on which Prospazio studio based the creation of this work of architecture and
engineering that reflects the extreme style of Lamborghini.
Clear shapes, a muscular character and sharp edges are the foundation of the underlying architectural concept, transforming a simple industrial space into an incredible piece of architecture with a strong identity. The Class A energy certification was obtained thanks to the use of state-of-the-art solutions and techniques, even with regards to external appearance.
The exterior facades consist of special three-layer polycarbonate walls and ventilated walls covered with ultra-thin ceramic slabs, created specifically in “Lamborghini Black”, which guarantees a high level of thermal insulation. On the second floor of the building, a ‘mini’ assembly line has been designed with state-of-the-art technology, that allows for the reproduction of all the assembly phases in a standard production line.
This allows accurate analysis of the phases of assembly of the different pre-series models, thus ensuring high standards of quality in subsequent industrial production. Covering some 5,000 square meters, Protoshop has very high-tech and functional operational areas organized on different levels.
The building is in compliance with all the latest regulations regarding earthquakes. Large windows made of triple-layer polycarbonate mounted with double chambers and filters to reduce refracted sunlight ensure proper solar illumination and a high level of thermal insulation. Lamborghini’s new building, intended for the development of prototypes and pre-series vehicles, represents a further element of Lamborghini’s strategy in terms of environmental sustainability, with the ultimate goal of becoming a zero-impact company, namely “CO2 free”, by 2015. The company is therefore aiming at a far greater energy efficiency than that required by law 1362/2010.
When compared with traditional industrial buildings of the same size, the energy saving calculated in trees “useful” to offset CO2 emissions provides for a quantity of 200 for normal buildings, while only 80 are required for this new building.
The building will also be equipped with a photovoltaic system that will ensure full coverage of the annual electrical energy required, allowing it to result in zero CO2 impact. This requirement will become a standard for all new Lamborghini buildings.
Automobili Lamborghini was the first car manufacturer in Italy to obtain the ISO 5001 certification in October 2011, which confirms the strong commitment of the company towards constant improvement in energy performance in all areas of activity.
The time needed for design and execution was also impressive: less than 15 months from the first draft to inauguration, 300 days from the beginning of construction to the finish, perfectly in line with a company accustomed to great speed.
At Lamborghini Protoshop, have been installed two car lifts Mod. IP1-HMT V07 with dual-access, certified IMQ (Italian certification body) for the transport of car and driver. Car lifts are used to move Lamborghini cars during the different phases of assembly. The platforms are 2.7 m wide and 5.37 m long, with a load capacity of 2,700 kg, which makes it possible to carry all types of cars made by the Company.
The systems have been treated with a hot-dip galvanizing process and have a 7.4 m rise connecting the two floors of the factory. They feature a speed of 15 cm per sec and a consumption of 9.5 kW.
Pendant push-button panels, connected with spiral flexible cables, were especially designed to guarantee comfort to the driver in terms of ergonomics (the push-button panel can be used either applied to a column, or from inside the car thanks to the extension cord).
These push-button panels have been installed on both sides of the car lift so as to be used in both directions, and therefore suited to left-hand drive cars also.
The authentication of the systems commands is performed through a magnetic card (badge) that, positioned in front of a reader, allows the use of the car lifts. The platform is interfaced with flame and heat sensors connected to the fire-alarm system. Furthermore, a sprinkler system has been installed beneath the upper floor of the lift shaft. Polycarbonate side guards, 1800 mm high, have been installed in order to be able to use the system also as a freight elevator. Idealpark car lifts are also in line with the building features as they ensure maximum safety to sports cars, focusing at the same time on aesthetics and user comfort.
Download Project report "The car lift for super luxury cars"
The top of the line realized in a beautiful villa on Geneva Lake.
IP1-CM MOB is an innovative car lift, available in...
Idealpark, an Italian leading company in the field of lifting equipment for cars based in Verona, has created two car lift...Read all
Made by Gruppo Building, the project The Number 6 has been awarded, for the Refurbishment category, as Building of the Year in...Read all
IdealPark designed an innovative goods lift at Distilleria Zanin based in Zugliano, Vicenza . Founded in 1985, Distilleria...Read all
One more time IdealPark joins Ferrari, few days go the installation of a car lift model IP1-HMT V08 has been finished.
The Automobile Museum was set up in 1932 based on the idea of two pioneers of Italian motoring,Cesare Goria Gatti and Roberto...Read all
“Live the dream” is the claim that welcomes visitors, promising an immersive, unique experience.
The Alfa Romeo Museum has been completely renovated and is even more prestigious. The historical site in Arese has a new look...Read all
IdealPark will participate on BAU 2017 in Munich! Visit us from 16th to 21st of January 2017 in Hall B3, Booth...Read all
The new IdealPark's philosophy is based on the concept of an original, innovative and "not ordinary" parking.This...Read all
In a superb newly built block on Long Lane, London, CAS Engineering Ltd, IdealPark’s distributor in England, has lately...Read all
Discover out latest project of IP1-HMT V07 car lift installed in a beautiful house that take care of every detail....Read all
Most cities were not designed and built for cars. There is therefore the need to find solutions which allow for reorganising...Read all
Car lift with cover installed in Kensington, district within the Royal Borough of Kensington and Chelsea in west London. The...Read all
Car lift model IP1-CM FF42 with roof covering installed in Knokke, on the public road, adjacent to a store. Knokke is a...Read all
BMW training center for Belgium and Luxembourg based in Bornem. Here BMW trains the sales team on the news and the technical...Read all
“We put disorder into order, and dare to celebrate the unique”. The Book of IdealPark is not only there to display our...Read all
Tech Insider posted a video on Facebook about IdealPark car lifts reaching millions of views in few hours. Follow...Read all
Car Lift Mod. IP1-HMT V03 installed in Turin, Italy, at the Skoda dealership Turincar.It connects three levels of the...Read all
In a beautiful surrounding area in the province of Reggio Emilia, Italy, the new IP1-CM MOB car lift replaced the...Read all
IdealPark presents the limited edition T-shirt “DISORDER – ORDER” realized by the designer Giuliano Garonzi.
New installation of car lift platform by IdealPark in St-Tropez, in the Provence-Alpes-Côte d'Azur, one of the most...Read all
McLaren 675LT Spider parked on an invisible IdealPark car lift model IP1-CM FF42 with roof covering installed in Knokke, on the...Read all
IdealPark inaugurates the new showroom in the splendid setting of the Klassikstadt in Frankfurt. The site is housed in a...Read all